FT24C02A
words are loaded, the 17 th data word will be loaded to the 1 st data word column address. The 18 th
data word will be loaded to the 2 nd data word column address and so on. In other word, data word
address (column address) will “roll” over the previously loaded data.
(C) ACKNOWLEDGE POLLING
ACKNOWLEDGE polling may be used to poll the programming status during a self-timed internal
programming. By issuing a valid read or write address command, the EEPROM will not acknowledge
at the 9 th clock cycle if the device is still in the self-timed programming mode. However, if the
programming completes and the chip has returned to the STANDBY mode, the device will return a
valid ACKNOWLEDGE signal at the 9 th clock cycle.
READ OPERATIONS
The read command is similar to the write command except the 8 th read/write bit in address word is set to “1”.
The three read operation modes are described as follows:
(A) CURRENT ADDRESS READ
The EEPROM internal address word counter maintains the last read or write address plus one if the
power supply to the device has not been cut off. To initiate a current address read operation, the
micro-controller issues a START bit and a valid device address word with the read/write bit (8 th ) set to
“1”. The EEPROM will response with an ACKNOWLEDGE signal on the 9 th serial clock cycle. An 8-
bit data word will then be serially clocked out. The internal address word counter will then
automatically increase by one. For current address read the micro-controller will not issue an
ACKNOWLEDGE signal on the 18 th clock cycle. The micro-controller issues a valid STOP bit after
the 18 th clock cycle to terminate the read operation. The device then returns to STANDBY mode.
(B) SEQUENTIAL READ
The sequential read is very similar to current address read. The micro-controller issues a START bit
and a valid device address word with read/write bit (8 th ) set to “1”. The EEPROM will response with
an ACKNOWLEDGE signal on the 9 th serial clock cycle. An 8-bit data word will then be serially
clocked out. Meanwhile the internally address word counter will then automatically increase by one.
Unlike current address read, the micro-controller sends an ACKNOWLEDGE signal on the 18 th clock
cycle signaling the EEPROM device that it wants another byte of data. Upon receiving the
ACKNOWLEDGE signal, the EEPROM will serially clocked out an 8-bit data word based on the
incremented internal address counter. If the micro-controller needs another data, it sends out an
ACKNOWLEDGE signal on the 27 th clock cycle. Another 8-bit data word will then be serially clocked
out. This sequential read continues as long as the micro-controller sends an ACKNOWLEDGE signal
after receiving a new data word. When the internal address counter reaches its maximum valid
address, it rolls over to the beginning of the memory array address. Similar to current address read,
the micro-controller can terminate the sequential read by not acknowledging the last data word
received, but sending a STOP bit afterwards instead.
? 2009 Fremont Micro Devices Inc.
DS3011B-page 7
相关PDF资料
FT24C16A-UMR-B IC EEPROM 16KBIT 1MHZ 8MSOP
FT24C256A-UMR-B IC EEPROM 256KBIT 1MHZ 8MSOP
FT24C512A-UDR-B IC EEPROM 512KBIT 1MHZ 8DIP
FT24C64A-UMR-B IC EEPROM 64KBIT 1MHZ 8MSOP
FT822AA IC LED DRVR PFC LOW TDH 8SOP
FT881A IC LED DRVR 30W 8SOP
FT93C46A-ITR-B IC EEPROM 1KBIT 2MHZ 8TSSOP
G3TB-IAZR02P-US AC100-240 INPUT MODULE AC 5MA 4-32VDC
相关代理商/技术参数
FT24C02A-5PG-T 制造商:未知厂家 制造商全称:未知厂家 功能描述:The FT24C02A is 2048 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM.
FT24C02A-5PR-T 功能描述:IC EEPROM 2KBIT 1MHZ TSOT23-5 RoHS:是 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:96 系列:- 格式 - 存储器:闪存 存储器类型:FLASH 存储容量:1M (64K x 16) 速度:150ns 接口:并联 电源电压:3 V ~ 3.6 V 工作温度:0°C ~ 70°C 封装/外壳:48-TFSOP(0.724",18.40mm 宽) 供应商设备封装:48-TSOP 包装:托盘
FT24C02A-5SG-B 制造商:未知厂家 制造商全称:未知厂家 功能描述:The FT24C02A is 2048 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM.
FT24C02A-5SG-T 制造商:未知厂家 制造商全称:未知厂家 功能描述:The FT24C02A is 2048 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM.
FT24C02A-5SR-B 制造商:未知厂家 制造商全称:未知厂家 功能描述:The FT24C02A is 2048 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM.
FT24C02A-5SR-T 制造商:未知厂家 制造商全称:未知厂家 功能描述:The FT24C02A is 2048 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM.
FT24C02A-FLR-T 功能描述:IC EEPROM 2KBIT 1MHZ SOT23-5 制造商:fremont micro devices usa 系列:- 包装:剪切带(CT) 零件状态:有效 格式 - 存储器:EEPROMs - 串行 存储器类型:EEPROM 存储容量:2K(256 x 8) 速度:1MHz 接口:I2C,2 线串口 电压 - 电源:1.8 V ~ 5.5 V 工作温度:-40°C ~ 85°C(TA) 封装/外壳:SC-74A,SOT-753 供应商器件封装:SOT-23-5 标准包装:1
FT24C02A-FPR-T 功能描述:IC EEPROM 2KBIT 1MHZ TSOT23-5 制造商:fremont micro devices usa 系列:- 包装:剪切带(CT) 零件状态:有效 格式 - 存储器:EEPROMs - 串行 存储器类型:EEPROM 存储容量:2K(256 x 8) 速度:1MHz 接口:I2C,2 线串口 电压 - 电源:1.8 V ~ 5.5 V 工作温度:-40°C ~ 85°C(TA) 封装/外壳:SC-74A,SOT-753 供应商器件封装:SOT-23-5 标准包装:1